Scraper, Audiokids BITS

Every moment recorded,
so you never miss a take.

An AAX, VST3, and AU plugin that continuously records every moment. Select and export exactly what you need, with timeline-accurate metadata, from mono to 9.1.6 immersive.

The Scraper window on a 5.1 track: its header with REC, LOOP, the record mode, Grab Last and SPOT TO SOURCE, and below it six lanes of recorded waveform with three pass markers, a selection ready to drag and the red write head; the bottom bar shows the selection start in the session timecode.

The take nobody recorded, back in three moves.

Scraper sits on a track, an aux or the master and keeps what plays through it, with nothing armed. When something worth keeping goes by, you drag it out of the buffer.

  1. Step 1: Insert

    On any track, aux or master, once. It only listens: what plays through it reaches you as it was.

  2. Step 2: Play

    Work as you always do. What plays through the track goes into the buffer as it plays, and between plays too when Scraper records all the time.

  3. Step 3: Drag out

    Select the moment on the waveform and drag it to a track, a folder or any app that takes a file. It carries its timeline position, so your DAW can put it back where it played.

    Playback with nothing armed, then the moment dragged out of the buffer onto a track.
    Playback with nothing armed, then the moment dragged out of the buffer onto a track.

The moment that just went by, back in two presses.

When the take worth keeping is the one that just played, there is nothing to look for on the waveform.

  1. Step 1: Grab Last

    One press takes the last seconds that played, as many as you set, and makes them a file ready to drag, with nothing to select.

  2. Step 2: Spot

    In Pro Tools, one more press puts that file on the selected track, exactly where it was recorded or at the edit cursor.

    Grab Last, then Spot: the clip lands on the empty track, under the audio it came from.
    Grab Last, then Spot: the clip lands on the empty track, under the audio it came from.

A recorder you never set up, for more than missed takes.

The sound you found while tweaking

You shape a sound through a plug-in, and somewhere in the tweaking it turns into exactly what the scene needs. By the time you think of recording it, you have moved past it, and Scraper, after the plug-in, still has it.

A granular plug-in in Pro Tools with Scraper after it: the moment that worked, dragged onto a new track and played back. With sound.
A granular plug-in in Pro Tools with Scraper after it: the moment that worked, dragged onto a new track and played back. With sound.
Watch the whole video0:56
Improvisations
A foley or ADR performance made up on the spot, kept even when nobody hit record.
A quick mixdown
Several layers of a sound design effect recorded as one file, reverb on Scraper’s own track included.
Live passes
Automation rides or a looping instrument, kept without setting up a record track.
Half speed
In Pro Tools, the timeline played at half speed and recorded, for textures and effects.

Everything it caught, on one screen.

The buffer fills the window: what played, where each pass began and where Scraper is writing now. Around it sits when it records, and the two ways a moment comes out.

The Scraper window on a 5.1 track: its header with REC, LOOP, the write head reset, the record mode, the scroll mode, Grab Last and SPOT TO SOURCE, and below it six lanes of recorded waveform with three pass markers, a selection ready to drag and the red write head; the bottom bar shows the selection start in the session timecode, a scrollbar and the zoom buttons.

Recording

The buffer

Getting it out

A 5.1 track, three passes recorded, a selection ready to drag.

Point at a part of the window, or pick one from the list.Tap a part of the window, or pick one from the list.

Recording on or off, and what a full buffer does: it keeps rolling over its oldest audio, so the latest stretch is always there, or it stops and keeps what it caught. Turning recording off never throws away what is already in it.

REC and LOOPRecording on or off, and what a full buffer does: it keeps rolling over its oldest audio, so the latest stretch is always there, or it stops and keeps what it caught. Turning recording off never throws away what is already in it.

Reset write headThe write head sent back to the start of the buffer, so the next pass begins there. Nothing is erased: what was recorded stays until new audio is written over it.

Record modeOnly while your DAW plays, or all the time. All the time catches what happens between takes: a line tried during a break, a sound found while the transport is stopped.

The bufferEverything recorded, drawn as it comes in, one lane per channel. The red line is where new audio is being written, and the cyan lines mark where each pass began, so a take is easy to find. A double-click selects a whole pass, from where play started to where it stopped, and a triple-click the whole buffer.

TimecodeWhere the audio under the pointer played on your timeline, in your session's own timecode, so you know which take you are looking at before you take it.

ZoomCloser in time and in level, for a detailed look at a take, with a scrollbar to move along the buffer while you are zoomed in.

ScrollingHow a zoomed-in view follows the write head: it stays where you left it, turns a page when the write head reaches the edge, or keeps the write head in the middle.

Grab LastThe last seconds that played, as many as you set, made into a file in one press, with nothing to select.

SpotIn Pro Tools, puts that file on the selected track, where it was recorded or at the edit cursor. In any other DAW, you drag it.

SettingsWhere the recordings are kept, one folder for every Scraper you open, how long the buffer is, and how much Grab Last takes.

Out of the way, until you need it.

It only listens

What plays through Scraper reaches you as it was, and bypassing it does not stop the recording. It records to disk, so even a long buffer does not weigh on your computer’s memory.

Files that know where they belong

Every export is named after its track, with a time stamp, and its metadata carries the timeline position it played at. In Pro Tools it is saved in the session’s own Audio Files folder; in any other DAW, beside Scraper’s recordings.

Still there after a crash

Every take you drag out or spot is a file on disk, in the Scraper Files folder. If the DAW crashes, or the session is closed without saving, it is still there.

In their own words.

Scraper is a blessing in ADR sessions, unrecorded rehearsals and genuine laughs are a thing of the past. Never miss the moment. Scraper is always rolling. With continuous buffer recording, Scraper captures every rehearsal, every laugh, every take – whether you hit record or not.

Daniel HackettFuriosa: A Mad Max Saga, Mortal Kombat II, A Minecraft Movie, Eden, Better Man, The Fall Guy

Scraper is a real game changer. It saves my recordings when I get lost in the creative flow of live sound design.

Giulio ConversiStromboli, Tigers, The New Pope

A Safety Recorder in Pro Tools. Insert a Plugin; you're done. Play, tweak then drag and drop sync on your timeline.

Victor BresseDead Dog (2024), Dancing on the Edge of a Volcano (2023)

What it needs. Any DAW on a Mac.

Plug-in

Formats
AAX, VST3 and AU
Hosts
Any DAW that hosts AAX, VST3 or AU
Spot
In Pro Tools, with the AAX version
Immersive channel order
Read correctly by Pro Tools 2026.4.1 or later

Mac

Operating system
macOS 10.13 or later
Processor
Intel and Apple Silicon, Universal Binary

Licence

Copy protection
PACE, requires an iLok.com account
Authorisation
On an iLok USB key (v2 or v3) or on your computer

Recording and files

Channel layouts
Mono, Stereo, LCR, Quad, 5.0, 5.1, 5.0.2, 5.1.2, 5.0.4, 5.1.4, 7.0, 7.1, 7.0.2, 7.1.2, 7.0.4, 7.1.4, 7.0.6, 7.1.6, 9.0.4, 9.1.4, 9.0.6, 9.1.6
Buffer
1 to 30 minutes for each instance, recorded to disk
Grab Last
1 to 120 seconds
Files
WAV, 24 bit, with Broadcast Wave metadata, at the session’s sample rate, carrying the timeline position they played at

Small tools. Big impact.

Scraper is part of the BITS suite, a collection of focused, single-purpose tools designed to solve specific workflow challenges. Each tool does one thing exceptionally well, keeping your workflow fast and distraction-free.

Try it on your own sessions.

Install Scraper, put it on a track in your DAW and click Try on the iLok screen: the 15-day trial licence goes into your iLok account and the plug-in runs at once.

Start the 15-day trial
  • ScraperFull version €49 Buy
Also in the Audiokids Bundle With Undertone 2, Synchronicity, DragOut 2 and Marker: €429 Regular price €490 for all five, Black Friday price until 11 December. €166 less than buying them separately. See the bundle

Education

50% off for students in sound and music courses, teachers and institutions.

Support

Anything else, before or after you buy: read the FAQ or write to us.

Back to the top